Aquarium management center

Overview

Your aquarium at a glance.

● SIMULATION MODE● No active alerts

Tank water level

Normal
Current estimated volume
240.0 gal
of 240 gallons · simulated reading
100.0%
water level
240 galTank capacity
+0.0 galChange today
OfflinePhysical sensor

System alerts

Clear
No simulated water-level warnings. Hardware monitoring is not connected.

Water level history

Illustrative · simulated
History will become real after a water-level sensor is installed and connected.

Quick controls

Simulation
Water refill
Automatic feeding
Water conditions
Camera

Account & Firebase connection

Checking sign-in status…
Google authentication is enabled. The database is secured, but this prototype does not read or write tank data yet.

Water level & volume

Normal
240.0 / 240 gal
Estimated water level100.0%
This is a simulated estimate. A real sensor must be installed and calibrated before these values can be used for aquarium operation.

Refill mode

Simulation only
Manual mode: choose a simulated amount and start a pretend refill.
Status: Idle · Simulation only

Refill history

This session only
No simulated refills yet.
Automatic refill is a planned feature, not an active control. Real automatic operation will require a prepared-water reservoir, calibrated level sensor, flow meter, independent high-level cutoff, maximum volume/runtime limits, and physical emergency stop. Never connect an untested pump to this website.

Feeding control

No feeder connected

Manual mode: simulate dispensing one measured portion.

No food will actually be dispensed. The physical feeder and portion size must be tested with the exact food before live operation.

Feeding schedule

Not active

Schedule is not connected to a feeder.

Feeding history

This session only
No simulated feedings yet.
The planned feeder will use a small motorized dispenser controlled by a local ESP32. We'll choose the exact feeder mechanism and food-safe materials before purchasing parts. Daily limits and a local schedule will help prevent repeated feeding if Wi-Fi fails.

Water condition records

Manual entries · No probes connected

Enter results from aquarium test kits. These values are saved only in the current browser session in this prototype; they are not yet stored in Firebase.

Recent test records

This session only
No test records entered.
These fields are record-keeping only, not automatic water-quality measurements. For reliable readings, use appropriate aquarium test kits. Any future automated probes must be selected and validated separately.

Project overview

Preparation stage
Planned aquarium
240 gallons
Ranchu aquarium · final setup planned
Awaiting arrival

The aquarium has not arrived yet. No monitoring sensors, refill equipment, feeder, or camera have been installed. The website is currently a prototype and all controls are simulations.

Equipment checklist & preliminary budget

Planning estimates · USD
These are rough budgeting ranges, not live quotes or confirmed product prices. Exact parts, compatibility, shipping, and final costs must be checked before purchasing. Mark items as purchased or installed only when that has actually happened.
ESP32 Wi-Fi controller
Main local controller
$8–$18
Not purchased
Water-level sensor
Waterproof sensor, selected for tank mounting
$10–$25
Not purchased
Independent float switches
Separate high-level safety cutoff and backup sensing
$8–$20
Not purchased
Low-voltage DC water pump
Moves prepared refill water
$18–$40
Not purchased
Flow meter
Measures water delivered
$8–$18
Not purchased
Pump driver, fuse, and cutoff hardware
Electrical control and independent protection
$15–$35
Not purchased
Power supply and low-voltage wiring
Properly rated supply, connectors, and cable
$20–$40
Not purchased
Prepared-water reservoir, tubing, and check valve
Water storage and safe delivery path
$25–$60
Not purchased
Automatic feeder mechanism
Food-safe hopper and controlled motor/servo
$15–$40
Not purchased
Enclosures, mounting, and water protection
Keep electronics safely away from splashes
$15–$35
Not purchased
Wi-Fi camera
Future live aquarium viewing
$25–$60
Not purchased
Aquarium water test kits
Manual checks for ammonia, nitrite, nitrate, and pH
$25–$60
To verify
$172Estimated low end
$431Estimated high end
PendingExact parts & quotes

Budget estimate for the listed monitoring, refill, feeder, camera, and test equipment only. It excludes the aquarium itself, stand, filtration, lighting, substrate, plants, fish, delivery, taxes, and any equipment already owned. The total is a planning allowance, not a shopping cart.

Project milestones

In progress
Website prototype & navigationBuilt
Google sign-in & database securityConfigured
240-gallon aquarium arrivalAwaiting
Firebase live data integrationPlanned
Water-level monitoringPlanned
Safe automatic/manual refillPlanned
Automatic/manual feedingPlanned
Camera integrationPlanned
Full safety testingNot started

Safety-first build plan

Required
Use low-voltage DC hardware where practicalDesign rule
Independent physical pump cutoffRequired
Maximum refill volume and runtimeRequired
Prepared, temperature-compatible water onlyDesign rule
Feeder portion calibration and daily capRequired
Test hardware without relying on fishRequired

No automatic pump or feeder operation will be enabled until components are selected, wired correctly, and independently safety-tested.

Project notes

Current planning record

This page is a planning overview. It does not track actual purchases automatically and its preliminary costs are not vendor quotes. We can update the equipment list, prices, and progress as each decision is made.

Alert & warning test center

Simulation only
Use this page to preview every warning popup and test how the dashboard reacts as the simulated water volume drops. These tests do not measure or change a real aquarium.

Simulated tank volume

Normal
240.0 / 240 gal
Current simulated level100.0%

Thresholds used by this prototype: Normal at 95% or above; Caution below 95%; Critical below 90%. For a 240-gallon tank, that means caution below 228 gallons and critical below 216 gallons.

Current alert state

Normal
The simulated water level is in the normal range.

Lower the volume past 228 gallons to test the caution state. Lower it past 216 gallons to test the critical state. The warning popup will appear when the state changes.

Preview every popup

You can trigger these independently

These buttons let you check the exact popup designs without changing the simulated tank volume.

Tank camera

Not connected
▣
Camera feed unavailableA compatible Wi-Fi IP camera will be integrated in a future stage.

The camera should support a stable local stream, preferably RTSP or another compatible integration. We'll avoid exposing the camera directly to the public internet.

Hardware connections

Not installed
Water-level sensorNot connected
ESP32 controllerNot configured
Refill pump & flow meterNot connected
High-water safety cutoffNot installed
Automatic feederNot connected
Tank cameraNot connected

Operating safeguards

Design stage
Independent pump cutoffPlanned
Maximum refill volume/runtimePlanned
Manual emergency stopPlanned
Feeding daily limitPlanned
Safe restart after power lossPlanned

Account & Firebase

Checking
Checking sign-in status…

Authentication is connected. This version intentionally does not access the Realtime Database. Database integration will be added in a separate step after the data structure and security rules are reviewed.

All pump, feeder, and sensor functions on this website are prototypes. No physical device is being controlled. Do not use the simulated controls as a substitute for checking the aquarium.